BMW E90

Price for single piece.

DriveShaftShop axle bar, inner CV and outer CV internal upgrade, using 36 spline high grade aircraft quality bars (stock axle bars are 28 spline) and a custom chromoly CV cage and race set makes these axles practically indestructible. Chromoly 108mm inner CV is a direct replacement for the stock unit, and features full aerospace grade internals. The factory BMW outer CV housing is made from a very strong material, and we upgrade the internals to an aerospace grade cage and race set also.

Wisefab Dynamic Halfshaft Axles can hold 1500hp and offer outstanding reliability.  Our axles use CV joints with low wear and high strength. The key is unique shaft material that not only has high-yield strength, but can also survive deformations or twists.

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Winters QRC differential (35 spline, spool), comes with: 

• HGK logo 6-bolt rear cover;
• 1x set of gear of your choice.
  

*please specify needed gear ratio set: ratio: https://www.wintersperformance.com/application/files/2515/7444/1049/10_Spline_Poster_compressed.pdf

Available OS Giken 2-way LSD on special request.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Please specify needed gear ratio set from 4.12 R&P chart: ratio: https://www.wintersperformance.com/application/files/2515/7444/1049/10_Spline_Poster_compressed.pdf

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Winters QRC skid plate for differential ground hitting protection with HARDOX reinforcement- 1pcs .
______________________________________________________________________________________________

* Prices below do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

3" chromoly weld-on yoke /  u-joint / U-bolts for driveshaft [compatible with Winters diff]
1350 Weld-on yoke set for 3" steel driveshaft:
Consists from:
1x cromoly 3" weld-on yoke;
1x U-joint;
2x U-bolts;
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

1350 Weld-on yoke set for 3" steel driveshaft:
Consists from:

• T10 style slip yoke; 
• 2x cromoly 3" weld-on yokes;
• 2x U-joints;
• 1x U-bolts.

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Chromoly, 32-Spline, Spicer 1350 Joint Style
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

3" Weld-on Yoke (1350) Chromoly for driveshaft.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

U-Joint, Spicer 1350 Style, Steel
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

U-Joint Girdles, Steel, Natural, 1350-Style, Pair
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Radiator carbon fan shroud [flat].
Shroud Size: L915 x H470 x D15 mm;
Fan size: diameter 385 mm.

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you. 

Universal rear mounted radiator carbon fan shroud.
Shroud Size: L950 x W500 x H330 mm;
SPAL fan size: diameter 385mm;

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Our flagship high performance starter battery LB28XX in a thermally & mechanically decoupled Carbon Fibre housing with implemented bracket, intelligent electronics with integrated, active kill-switch – engineered and built by hand in Germany.
WEIGHT - 2700 g
DIMENSIONS - 270×170×150mm

https://en.liteblox.de/shop/liteblox-lb28xx-lightweight-battery-for-performance-and-motorsport/

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Our flagship high performance starter battery LB20XX in a thermally & mechanically decoupled Carbon Fibre housing with implemented bracket, intelligent electronics with integrated, active kill-switch – engineered and built by hand in Germany.
WEIGHT - 2000 g
DIMENSIONS - 270×170×150mm

https://en.liteblox.de/shop/liteblox-lb20xx-lightweight-battery-for-performance-and-motorsport/

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Our flagship high performance starter battery LB14XX in a thermally & mechanically decoupled Carbon Fibre housing with implemented bracket, intelligent electronics with integrated, active kill-switch – engineered and built by hand in Germany.
WEIGHT -1400g
DIMENSIONS - 270×170×150mm

https://en.liteblox.de/shop/liteblox-lb14xx-lightweight-battery-for-performance-and-motorsport/

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you. 

Tow straps from TRS are suitable for fitting to the front or rear of the car, and feature a 1/2 inch (12.5mm) diameter bolt hole mounting.
Strong break strength, crucial when recovering cars from gravel traps

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Universal rear mounted radiator carbon fan shroud.
Shroud Size: L790 x W470 x H350 mm;
SPAL fan size: diameter 350mm;

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices below do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Wisefab BMW e9x rear suspension kit can be fitted on a variety of BMW models. E90, E91, E92, E81, E82, E87, E88 models. All the metal components on E90 rear suspension are from high strenght steel, including sheetmetal components, tubes, tube ends and rod end housings. Also for weight reduction and stiffness purposes all the suspension links are designed straight and tubular or boxed type. Rod ends and spherical bearings used, no rubber bushings.

Here is our recommended alignment parameters:
Toe in/out: Toe in 3-10mm per side
Camber: -0.5 +/-0,5

BMW E90 / E92 / E92 M3 / E81 / E82 rear subframe mod kit is addition to Wisefab rear suspension that allows to get even more rear grip out of it.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Wisefab BMW e9x lock kit can be fitted on a variety of BMW models. E90, E91, E92, E81, E82, E87, E88 M and nonM. Brackets included to fit M brake caliper. Either M or nonM front coilovers would work with Wisefab E90 knuckle. All the metal components on Wisefab E90 front suspension are from high strenght steel, including sheetmetal components, tubes, tube ends and rod end housings. Rod ends and spherical bearings are used, no rubber bushings.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.