BMW E92 Eurofighter

E92Eurofighter Full Build [Ready To Race Drift Car]

Estimate car dry-weight: 1200kg
Roll cage (2024 FIA spec certificate)
Fully stich welded chassis
Front & Rear crash bars with bodykit mounting points
Sparco fire extinguisher system (manual)
Engine:
LS V8 700HP rev limit: 7000rpm or
LS V8 800HP rev limit: 8000rpm or 
2JZ 800HP rev limit: 8000rpm;
Front billet motor plate with Bosch PS pump and Alternator 250A;
Sprint car intake with KN filter for LS engines;
Dailey Drysump oil pan and pump
ARE Racing 3gal oil tank & filter remote adapter
ATI Crank damper
Exhaust system:
Steel full exhaust (heat resistant coated)
Straight 3,5" pipe to rear-end 
Engine management:
Motec: ECU M130, PDM30, Dash C125, 15 buttons keypad,
dual lambda, 8x EGT sensors, Mil-Spec racing engine & car harness;
LiteBlox carbon battery LB28XX;
Drive train:
Samsonas 4RWDs sequential 4-speed gearbox (shifter, display, potentiometer)
SPEC twin-disc clutch set with hydraulic bearing
3” Carbon Fiber Driveshaft with Chromoly yokes
Winters QRC differential (35 spline, spool) 
Chromoly PRO level axles
Suspension/Steering:
Nitron 2-way adjustable front and rear coilovers with top mounts
Front and rear Wisefab lock kit with hubs and bearings
Rear swaybar (solid)
HGK steering column with quick release
Refurbished BMW E92 steering rack
Wilwood lightweight brake kit:
Tilton floor mounted pedal assy with master cylinders
HGK hydro e-brake w/Tilton master cylinder
HGK CNC machined aluminum center bells and caliper adapters
Front: 6-piston calipers, 11.75x1.25" vented rotors
Rear (dual caliper): 4-piston calipers, 12x0.35" drilled rotors
Fuel system:
FIA approved 30 or 40ltr FuelSafe cell with A1000 internal fuel pickup system,
pre and post fuel filter, Aeromotive fuel pressure regulator;
Lightweight aluminum fuel hard lines with aluminum fittings
Cooling system:
Rear mounted HGK dual pass radiator
Oil cooler (heat exchanger)
Carbon Fan diffusor with 2x SPAL high-flow fans
DC Auxiliary water pump (rear mounted)
Body work:
Complete Carbon/Kevlar HGK Eurofighter bodykit
Polycarbonate windshield and
Sapphire coated lexan door, quarter and rear windows;
Interior:
Sparco QRT seats, TRS 6-point seat belts, Sparco 2-spoke steering wheel;
Carbon Fiber interior (dashboard, center console, inner door panels, quarter side panels)
Wheel/tires:
HGK style rims Front 9x18, tire 255/35 R18
HGK Style rims Rear 10x18, tire 265/35 R18
_____________________________________________________________________________________________

* Prices below do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Detachable Carbon window frames. 
Fits with HGK made doors or needs modification for your existing door to fit properly.

Estimate weight - 1,20kg/each.

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

BMW E92 Carbon Fiber door inner panels.

Made in *The Vacuum Infusion Process (VIP) is a technique that uses vacuum pressure to drive resin into a laminate. Dry materials are laid into the mold and the vacuum is applied before resin is introduced. Once a complete vacuum is achieved, resin is literally sucked into the laminate via carefully placed tubing.
Ideal solution for nice interior finish long term service cost-effectiveness.

Estimate weight Carbon Fiber - 0,7kg/each.

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

*Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Lightweight dashboard for BMW Series-3 E92, available in LHD (left hand drive) or RHD (right hand drive) option.

Estimate weight Carbon Fiber - 2,80kg;

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Center console/tunnel cover along with phone and cup holder.
For nice and fancy final interior look!!!

Estimate weight - 1,80kg;

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Universal carbon fiber driver foot tray, can be installed on LHD or RHD cars.
Dimensions: L50xW37xH27mm, Estimate weight - 1,30kg.

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Passenger foot tray manufactured from lightweight carbon fiber.
Estimate weight - 2,30kg.

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

E92 Rear quarter inner panels for weight save and nice finish look.
Available small or large size.

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Carbon Fiber NOS bottle base plate with bottle mounting bracket.

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

BMW - E92 Coupe -Hardcoated Lexan Polycarbonate front windscreen
ENDURO® (thickness 5mm) Hardcoated polycarbonate windscreen
Fully thermoformed and manufactured from a selected high optical grade polycarbonate and coated with our unique ENDURO® hardcoating to help resist scratching and chemical attack.

• Manufactured from a high optical grade polycarbonate
• Hardcoated with our ENDURO® polysiloxane mar-resistant coating
• Optional internal ENDURO-FOG® anti-misting coating available
• High detailed black borders pre applied

______________________________________________________________________________________________

* Prices below do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

High performance polycarbonate [sapphire coated] window kit will save your money and time. Sapphire coating will protect glass from scratches and it will stay clear and visible even after 5 years of usage.
Approximately 50% weight saving compared to glass. Thickness - 3mm.
4 and 5mm thickness glass available on request.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

E92 Steering Column Kit With Steering Wheel Quick Release.
Manufactured length 955mm (please specify if different length is needed).
Column tube available from steel or carbon fiber material.
CNC Mounting bracket for carbon fiber column available for 38 or 40mm tube fitment;

Estimate weight: Steel - 3,50kg / Carbon Fiber - 1,85kg;
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Legendary HGK handbrake with Tilton master cylinder.
In classic black & gold color design.
Optionally available shifter & handbrake baseplate LHD (left hand drive) or RHD (right hand drive)

Available master cylinder sizes: 1", 13/16", 15/16", 3/4", 5/8", 7/10", 7/8"
https://tiltonracing.com/product/78-series-master-cylinders/

______________________________________________________________________________________________

* Prices below do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you. 

Steel base plate for proper shifter and handbrake mounting position on tunnel.
Available in LHD or RHD.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Carbon Fiber Samsonas gearbox SEQ shifter handle replacement. 
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Tilton’s 600-Series 3-pedal floor mount assembly set comes with:

• Tilton’s 600-Series 3-pedal floor mount assembly;
• 3x 76-series master cylinders (choice of 5/8", 7/10", 3/4", 13/16", 7/8", 1");
• 3-chamber plastic reservoir;
• Throttle linkage (mechanical or drive-by-wire);
• Premium remote brake bias adjuster;

Tilton’s 600-Series 3-pedal floor mount assembly features traditional fixed-mount master cylinder and balance bar technology and provide excellent performance at competitive prices. Pedal assemblies are available in floor-mount, firewall-mount and overhung configurations.

Tilton floor mounted pedal assembly weld-on bracket comes with 6 different screwed mounting positions.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Homologation: FIA 8855-1999
Material: QRT
Ideal for Touring and Rally races
- Non-slip fabric for shoulder and seat restraint
- Divisible lergest and seat cushion
- Available in 2 sizes (Circuit II size L), with integrated HRS (Head Restraint System).
Fixed using M8 lateral fastenings with 290 mm spacing.
Weight: 8,6 kg
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Steering Wheel Diameter: 350mm;
Steering Wheel Bolt Pattern: 6x70mm;
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

HGK Wheel Spacers (anodized) with ARP studs, thread 12x1.25
Available in bolt pattern [PCD]:

• 5x120 to 5x120mm
  
• 5x120 to 5x114.3mm
  
• 5x114.3 to 5x120mm
  
• 5x114.3 to 5x114.3mm
  

Thickness: 40/45/50/55/60mm (other sizes available on request)

Center Bore: to be confirmed at the time of order. ______________________________________________________________________________________________

* Prices below do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.