Nissan S13/14/15/370Z

Nissan S-chassis rear suspension kit is designed with racing in mind. Cool and unique features such as a new "compression" design toe arm, upgraded camber arm and reinforced knuckle.

First class materials with design optimization have led to major weight reduction. The knuckle weighs ~2,7kg and at the same time can hold 5-6G of load peak at tire contact patch on 1100kg car. S14 Wisefab knuckle has revised kinematics when compared with OEM and built in anti-squat, higher roll center, less camber gain and adjustable bump steer for maximum grip and performance. Every piece of this suspension kit is also available as spare parts.

Here are our recommended alignment parameters:
Camber: -0,5 
______________________________________________________________________________________________

* Prices below do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Wisefab S13 Nissan angle kit with rack offset spacers has two major upgrades. Lower control arm has been redesigned for more convenient alignment setup. The knuckle has been designed to allow more suspension travel with the trending long stroke coilovers. The result was more grip at the front and more precise steering. This will give you the competitive edge. All the parts in the Nissan S13 angle kit are provided as spare parts.

S13 kit is for the 4 lug spindle, if you have 5 lug on your S13 please select the Nissan S14 Angle kit.

Want to know how does Wisefab Lock kit fits your driftcar check below the link CHECK FITMENT or here!

Check out the Nissan S13 rear suspension kit

Here is our recommended alignment parameters:
Toe in/out: If Ackermann is 0 or negative then toe is 2mm out. If Ackermann is positive then toe is 0
Camber: -4 +/-0,5
Caster: 3,5 +/-0,5
____________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Wisefab Nissan S13 angle kit has been reengineered where relocated the steering rack for improved Ackermann curve. The result was more usable angle with better feel and precise handling. Relocating the steering rack will eliminate the need for rack offset spacers which means more rigid and precise handling. Lower control arm has been redesigned for more convenient alignment setup. The knuckle has been designed to allow more suspension travel with the trending long stroke coilovers. This will give you the competitive edge. All the parts in the Nissan S13 angle kit are provided as spare parts.

S13 kit is for the 4 lug spindle, if you have 5 lug on your S13 please select the Nissan S14 Angle kit.

Want to know how does Wisefab Lock kit fits your driftcar check below the link CHECK FITMENT or here!

Check out the Nissan S13 rear suspension kit

Here is our recommended alignment parameters:
Toe in/out: If Ackermann is 0 or negative then toe is 2mm out. If Ackermann is positive then toe is 0
Camber: -4 +/-0,5
Caster: 3,5 ´+/-0,5
____________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Nissan S13 S14 S15 Front V2 Rack Offset Spacer Kit
____________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Nissan S Chassis steering rack relocation hardware. Requires OEM front subframe cutting and welding. It moves rack 46mm forward for better Ackemann curve and a 5mm lower for oilpan clearance. It works all big drift series rules that require OEM subframe usage, but allow modifications for rack relocation
____________________________________________________________________________________________

* Prices below do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

____________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Wisefab Nissan S14 angle kit with rack offset spacers has two major upgrades. The knuckle has been designed to allow more suspension travel with the trending long stroke coilovers. Lower control arm has been redesigned for more convenient alignment setup. The result was more grip at the front and more precise steering. This will give you the competitive edge. All the parts in the Nissan S14 angle kit are provided as spare parts.

S14 / S15 kit is for the 5 lug spindles, if you have 4 lug spindles please select the Nissan S13 angle kit.

Want to know how does Wisefab Lock kit fits your driftcar check below the link CHECK FITMENT or here!

Check out the Nissan S14 Rear Suspension kit.

Here is our recommended alignment parameters:
Toe in/out: If Ackermann is 0 or negative then toe is 2mm out. If Ackermann is positive then toe is 0
Camber: -4 +/-0,5
Caster: 3,5 +/-0,5
____________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Wisefab Nissan S14 angle kit has redesigned knuckle to allow more suspension travel with the trending long stroke coilovers.  the new lower control arm is suitable for S13 and S14 and has more convenient adjusting. Steering rack has been relocated to improve Ackermann curve which  resulted as more usable angle with better feel and precise handling. Relocating the steering rack will eliminate the need for rack offset spacers which means more rigid and precise handling. All these changes will give you the competitive edge. All the parts in the Nissan S14 angle kit are provided as spare parts.

 S14 / S15 kit is for the 5 lug spindle, if you have 4 lug please select the Nissan S13 angle kit.

Want to know how does Wisefab Lock kit fits your driftcar check below the link CHECK FITMENT or here!

Check out the Nissan S14 Rear suspension kit.

Scroll down to order your spare parts conviently right here!

Here is our recommended alignment parameters:
Toe in/out: If Ackermann is 0 or negative then toe is 2mm out. If Ackermann is positive then toe is 0
Camber: -4 +/-0,5
Caster: 3,5 ´+/-0,5
____________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

 Nissan S14 S15 Rear Suspension Kit MOD
____________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

You can now get your Nissan 370Z rack relocated for more precise and ridgid steering. Already have Wisefab 370Z angle kit? Get your Rack Relocation kit!

Rod ends and spherical bearings are used, no rubber bushings. Adjustable Ackermann with washers. Lower control arms are one piece design and the shock motion ratio can be adjusted with out affecting the ride height. Nissan 370Z spare parts available right here. Scroll down and order your spare parts here.

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Want to get rid of those offset spacers? Precise and rigid wheel control at extreme angles. Check out this rack relocation kit for your Nissan 370Z or Infinity G37.

“This manual describes the process of modifing the Nissan 370Z (2008-2020) front subframe. With this modification steering rack is moved forward. This setup can only be used with Wisefab 370Z Angle kit. Stock engine mounts can be used with this subframe upgrade. Engine will be 3mm higher. Solenoid delete kit included. All the stock bolts and nuts are needed.”

A quote from our installation kit.

There is no welding needed to install this rack relocation kit.

Subframe modifications are same for the RHD and LHD steering rack. We have used a left hand streering rack for this installation guide.

Here is some tools you will need:

• Safety equipment (Googles, gloves)
• Marker, masking tape, scissors
• Wrenches
• Angle grinder for cutting and sanding
• Ratchet strap

____________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Nissan 370Z rear suspension with with convenient camber adjustment and bumpsteer correction. All the racing know how and experience has put to this product. Kinematics have be revised for maximum performance on lowered car. Roll center has moved higher, camber gain has been revised. This rear suspension kit is the same weight as the OEM aluminum but much stronger.

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

HGK (Eurofighter) style forged rims available in sizes:
R17xJ (8.0 to 11.00);

Bolt pattern 5x120mm and 5x114,3mm. 
Various options available: Size, Width, Bolt pattern and Offset to be confirmed at the time of order. Special color on request.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

HGK (Eurofighter) style forged rims available in sizes:
R18xJ (7.5 to 12.00);

Bolt pattern 5x120mm and 5x114,3mm. 
Various options available: Size, Width, Bolt pattern and Offset to be confirmed at the time of order. Special color on request.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

HGK (Eurofighter) style forged rims available in sizes:
R19xJ (8.0 to 12.00)

Bolt pattern 5x120mm and 5x114,3mm. 
Various options available: Size, Width, Bolt pattern and Offset to be confirmed at the time of order. Special color on request.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

HGK (Eurofighter) style forged rims available in sizes:
R20xJ (8.0 to 11.00);

Bolt pattern 5x120mm and 5x114,3mm. 
Various options available: Size, Width, Bolt pattern and Offset to be confirmed at the time of order. Special color on request.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Lowering coil springs
Merwede Springs is producing lowering springs since 1986, and has built up a very extensive assortment with a fitting set for almost every car model. These sets are developed in our own research centre and produced in our factory. A unique combination because the entire process, from development to end result, takes place under one roof.

Choose your springs from catalogue and send your inquiry with part number in comment, we will provide your quote with total price.

COBRA SUSPENSION CATALOGUE 
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Choose WORK wheels model and size from catalogue (link below), send us your inquiry with part number in comment and we will provide you quotation with the total price and estimate lead time.

WORK WHEELS CATALOGUE
_____________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.