BMW F22 Eurofighter

BullDog QRC differential (35 spline, spool), comes with: 

• HGK logo 6-bolt rear cover;
• 1x set of gear of your choice;

Available OS Giken 2-way LSD on special request.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Winters QRC differential (35 spline, spool), comes with: 

• HGK logo 6-bolt rear cover;
• 1x set of gear of your choice.
  

*please specify needed gear ratio set: ratio: https://www.wintersperformance.com/application/files/2515/7444/1049/10_Spline_Poster_compressed.pdf

Available OS Giken 2-way LSD on special request.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Please specify needed gear ratio set from 4.12 R&P chart: ratio: https://www.wintersperformance.com/application/files/2515/7444/1049/10_Spline_Poster_compressed.pdf

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Winters QRC skid plate for differential ground hitting protection with HARDOX reinforcement- 1pcs .
______________________________________________________________________________________________

* Prices below do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

1350 Weld-on yoke set for 3" steel driveshaft:
Consists from:

• T10 style slip yoke; 
• 2x cromoly 3" weld-on yokes;
• 2x U-joints;
• 1x U-bolts.

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

3" Weld-on Yoke (1350) Chromoly for driveshaft.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Chromoly, 32-Spline, Spicer 1350 Joint Style
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

U-Joint, Spicer 1350 Style, Steel
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

3" chromoly weld-on yoke /  u-joint / U-bolts for driveshaft [compatible with Winters diff]
1350 Weld-on yoke set for 3" steel driveshaft:
Consists from:
1x cromoly 3" weld-on yoke;
1x U-joint;
2x U-bolts;
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

U-Joint Girdles, Steel, Natural, 1350-Style, Pair
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Performance Design pTR carbon intake with fuel rails in throttle body adapter plate.
Available options:

• set of 85lbs/hr injectors
• 105mm Holley throttle body (choice of DBC (drive by cable) or DBW (drive by wire))

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Our flagship high performance starter battery LB28XX in a thermally & mechanically decoupled Carbon Fibre housing with implemented bracket, intelligent electronics with integrated, active kill-switch – engineered and built by hand in Germany.
WEIGHT - 2700 g
DIMENSIONS - 270×170×150mm

https://en.liteblox.de/shop/liteblox-lb28xx-lightweight-battery-for-performance-and-motorsport/

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Our flagship high performance starter battery LB20XX in a thermally & mechanically decoupled Carbon Fibre housing with implemented bracket, intelligent electronics with integrated, active kill-switch – engineered and built by hand in Germany.
WEIGHT - 2000 g
DIMENSIONS - 270×170×150mm

https://en.liteblox.de/shop/liteblox-lb20xx-lightweight-battery-for-performance-and-motorsport/

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Our flagship high performance starter battery LB14XX in a thermally & mechanically decoupled Carbon Fibre housing with implemented bracket, intelligent electronics with integrated, active kill-switch – engineered and built by hand in Germany.
WEIGHT -1400g
DIMENSIONS - 270×170×150mm

https://en.liteblox.de/shop/liteblox-lb14xx-lightweight-battery-for-performance-and-motorsport/

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you. 

BMW F22 rear mounted radiator cooling system kit
Consists from:

• HGK custom welded dual pass twin core 970x470x65mm radiator
• 2x SPAL high-flow fans with Carbon Fiber diffusor
• inlet and outlet 32mm (silicone tube use). AN20 inlet and outlet +80.00€;

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Universal rear mounted radiator carbon fan shroud.
Shroud Size: L950 x W500 x H330 mm;
SPAL fan size: diameter 385mm;

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Radiator carbon fan shroud [flat].
Shroud Size: L915 x H470 x D25 mm;
Fan size: diameter 385 mm.

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you. 

Radiator carbon fan shroud [flat].
Shroud Size: L915 x H470 x D15 mm;
Fan size: diameter 385 mm.

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you. 

Universal rear mounted radiator carbon fan shroud.
Shroud Size: L790 x W470 x H350 mm;
SPAL fan size: diameter 350mm;

All parts are for TRACK AND RACE CARS only (not exhibition), adjustments will be required at fitting.
Please note that there may be occasional small imperfections, such as small cracks, scratches and/or slight size variations, which in no way affect their high-performance capabilities.
______________________________________________________________________________________________

* Prices below do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.

Twin core dual pass radiators made on order.
You can select the inlet and outlet size of your choice, as well a high or low mounting position and side. Mounting provisions for fan shrouds are included onto the radiators.

inlet and outlet 32mm (silicone tube use). AN20 inlet and outlet +80.00€;

*available sizes on special request - info@hgkshop.com

______________________________________________________________________________________________

* Prices do not include shipping costs.
Request a quotation and Your shipping quote/estimate will be emailed to you.